<<< règles de jeu
Creator : Kris Burm. A game about making sacrifices! The third game of Project GIPF. For 2 players.
Strange… A board that gets smaller and two players playing with the same marbles... In the beginning you'll have to get used to it, but once you do, you'll find out that there are many ways to get the game under control. Play the right marble at the right place at the right moment, and you'll gain the upper hand.
- 6 white marbles
- 8 gray marbles
- 10 black marbles
- 49 round board pieces, called rings.
You must try to capture either
- 3 marbles of each color,
- or 4 white marbles,
- or 5 gray marbles,
- or 6 black marbles.
The winner is the first player to achieve one of these goals.
In total you have 49 rings. To play the basic game you need only 37 of them. So, you don’t need the 12 remaining rings yet. After mastering the basic strategies, you can use 11 of them to play ZÈRTZ on a board with 48 rings. (See point H. below: Expanded board.)
1. Take 37 rings and assemble a hexagonal game board.
Diagram 1: The board at the start of the game.
2. The 6 white, 8 grey and 10 black marbles are the “pool”. Put the pool next to the board, so that both players can easily reach the marbles.
3. Draw lots to determine who will go first.
C. Making a move
When it is your turn, there are two possible moves: you either place a marble of any color on the board and then remove a ring, or you capture one or more marbles.
Placing a marble and removing a board piece
1. When it is your turn, you first select a marble from the pool. Next you must place it on the board. You may select any color you wish and you may place the marble on any vacant ring.
Important: the marbles, in the pool as well as on the board, belong to both players (i.e. neither you, nor your opponent have your “own” marbles to play with).
2. After you have placed a marble on the board, you must remove a “free” ring. “Free” means: the ring must be vacant and it must be positioned at the edge of the board. In other words, there may not be a marble on it and you must be able to remove it from the sides without disturbing the position of the remaining rings.
Diagram 2: only the rings with an arrow may be removed.
3. Placing a marble and removing a ring is one turn. You must do both. However, it may occur that you cannot remove any of the vacant rings without disturbing the position of the other rings. In this case you must not remove a ring (i.e. your move ends after having placed a marble).
Note: don’t stack the rings that you remove on top of each other. It is better to use them to put your captured marbles on. (See Captured marbles below.)
1. Capturing is compulsory; you must do it if you can.
2. To capture a marble, you must jump over it with another marble (i.e. as in checkers). You may only jump over a marble on an adjacent ring. You may jump in any direction if there is a vacant ring behind the marble that you intend to capture.
3. The color of the marbles is of no importance when capturing: you may jump with any marble over any other marble, no matter the color, no matter whether you or your opponent placed it on the board.
For example: you put a white marble on the board. A few moves later your opponent places a grey marble next to it. There is a vacant ring behind both marbles. You may select the option you think is most advantageous: jumping with the white marble over the grey one or the other way around.
4. If you jump over a marble and you have the possibility to jump over a second one, then you must do so, no matter in which direction you make the second (or third) jump.
Diagram 3: The arrows indicate the different ways to capture.
1 -> 2 and 3
1 -> 2, 4 and 5
2 -> 1
3 -> 2 and 1 .
5. If you can capture different numbers of marbles (e.g. in one direction 1 marble and in another direction 2 marbles), you may freely chose which possibility you’ll go for.
6. Capturing one or more marbles counts as a complete move. In other words: that turn you may not place a marble, nor may you remove a ring.
D. Isolating marbles
1. If you succeed in isolating one or more rings from the main part of the board, you may claim the isolated rings, including the marbles on them. Most of the times it will concern one ring, thus one marble, but it is not limited to one. This “claiming” should be seen as a second way of capturing marbles, but it is not compulsory.
Diagram 4: if you remove the ring indicated by the arrow, you capture the marble on the isolated board piece.
2. You can only capture marbles this way if there are no vacant rings in the isolated group. So, you may claim one or more rings when you either put a marble on the last vacant ring of an already isolated group, or remove the ring through which a group of occupied rings gets isolated.
Note: you capture marbles this way as a result of a move; it is not itself a move.
E. End of the game
As mentioned at the beginning of these rules: the first player to obtain either 3 marbles of each color, or 4 white marbles, or 5 grey marbles, or 6 black marbles wins the game.
F. Special cases
- It may occur that there are no more marbles in the pool before the game has ended. In this case you must continue with your captured marbles. As with selecting a marble from the pool, you may choose any color of your captured marbles to play with - and this goes on until one of the two players gets a winning set of marbles.
- In the extreme event (not to exclude the possibility) that all the rings would be occupied before either of the players achieves one of the set goals, it is the one who put a marble on the last vacant ring who wins. In fact, he may claim all of the remaining rings, including the marbles, for this situation is to be seen as an isolated group of occupied rings.
- If it would happen that two players start repeating the same sequence of moves, the game ends in a tie.
A bit of strategy : See diagram 5 below! Player A is 5 marbles behind, but he can win the game from here! He puts a black marble on ring 1 and removes ring 2. By doing so, he forces Player B to jump over (and to capture) that black marble. The fact that it is a black marble, means that Player B hasn’t a winning combination yet. Then player A goes again: he puts a white marble on ring 3 and removes 4. He captures the 2 white marbles on the isolated rings and wins with a set of 4 white marbles!
G. Expanded board
ZÈRTZ was initially released with only 37 rings. That is all you need to explore the game and to find out how challenging it is. However, once you have become an expert player you may want to play with more rings.
The extra rings you need to play ZÈRTZ on a larger board were available from the beginning, but only as a part of GIPF Set 2. This new version of ZÈRTZ contains 12 more rings than the initial version. But be careful! Playing on an enlarged board only makes sense if you have first mastered the basic strategies. ZÈRTZ is a fast and explosive game. If you add extra rings too soon, you risk to turn it into a long, possibly even boring game - and that is not the purpose!
On the other hand, once you are familiar with the principles of making sacrifices and long sequences of forced moves, then you will find an extra challenge in making the board larger. For example: you can add a row 3 rings at one side of the board. 3 extra rings don’t add that much complexity, but they change the board into an irregular hexagon and that implies that you now have more different opening moves. You can go one step further and play with 6 or 7 extra rings. If you want to play the tournament version, you must add 11 rings. The more rings, the harder it is to control the game!
Note 1: you don’t need extra marbles; the number of marbles and the conditions to win remain unchanged.
Note 2: the 49th ring is a spare piece. And you may need it if you have GIPF Set 2 and want to play ZÈRTZ with 24 extra rings.
marbles on the isolated rings and wins with a set of 4 white marbles!
To play with 40 rings: add rings 1.
To play with 43 rings: add rings 1 and 2.
To play with 44 rings: add rings 1 and 3.
To play with 48 rings: add all the rings.
H. Tournament rules
- Tournaments are played on a board that consists of at least 48 rings. (If you want to play on a board that is even larger than 48 rings, you’ll need GIPF Set 2, which contains 12 more rings. ZÈRTZ with 24 added rings, thus on a board with 61 rings, may well become the ultimate tournament version some day.)
- Handling the marbles and the rings: (a) once you have taken a marble from the pool, you must play it (i.e. you may not put it back and chose a marble of another color), (b) as soon as you touch a ring with the marble you play with, you must put it on that ring, and (c) as soon as you touch a vacant ring at the edge of the board, you must remove that ring.
- Capturing is compulsory, meaning that you may force the opponent to take back his last move if he didn’t do so. (Taking back a move includes putting back the removed ring.)
- For example: you put a marble on the board and create an opportunity for a capture. Your opponent does not capture; he takes a marble, places it on the board and next removes a ring. You may have a look at the new situation and either do the capturing yourself, or force your opponent to take back his move and oblige him capture. (If you don’t ask your opponent to take back his move and you don’t capture either, then it is your opponent, when it is his turn again, who may force you to take back your last move.
I. Blitz variant
This variant concerns the original “Basic Game”. It is a short, very aggressive and unforgiving version to play ZÈRTZ. It is played on a board with 37 rings, and with one marble less per color. So, you only need 5 white marbles, 7 grey marbles and 9 black marbles. Now you must either capture only 2 marbles of each color, or 3 whites, or 4 greys, or 5 blacks to win the game.